Wire Stripping Machine 0.06-1.5 Inch 370w Portable Powered Wire Stripper Machine

Overview: Wire Stripping Machine 0.06 inch -1.5 inch,  370w Portable Powered Wire Stripper Machine, 11 Channels 10 Blades & 65ft/minute, Automatic Wire Stripping Tool for Recycling Copper Wire.High Stripping Efficiency. automatic wire stripper features a 370W 110V single phase induction motor, motorized to save you time, effort, and money. The gearbox leads to fast stripping speed. It creates a fast stripping speed of 65 feet per minute, plus the laborsaving design increases security and convenience.370w Automatic Wire Stripping Machine 0.06 inch -1.5 inch, 11 Channels 10 Blades & 65ft/minute, Wire Stripping for Recycling Copper Wire1. Comparing the cables/wires' diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time. Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades.2. On the output side, if the cuts on the cables/wires are too deep, please check below points:1) Please adjust the handles on the input side, screw down or loose them. (M12 handles)2) Check whether the cables/wires on the right position as you feeding them.3) Make sure the blades are sharp, if not, polish them with the oil stone.3. On the output side, if see the plastic (PVC) has been stripped, but the copper wires can not been disgorged, please check below 4 points:1) polish the axis of the upside with the oil stone.2) Check whether the springs are loose, if yes, screw down to make them tighten.3) The diameter of the cables/wires are too small, please adjust the space between the two axises to 0.3-0.6mm.Easy To Operate370W Ppowerful MotorAlluminum AlloyProtective Design10 Blades & 11 HolesAdjustable ScrewThe electrical wire stripper is suitable for different sizes of wires and perfect for recycling copper wire, removing the plastic and rubber insulation from undamaged scrap wires. Product Features:0.06-1.5in Wire Stripping Wire stripping range is Dia 1.5-38mm (0.06-1.5in) and make sure the cables diameter are similar with the feeding holes, large wires in large feeding holes, small wires in small feeding holes, flat wires in flat feeding holes.11 Channels &10 Blades Our automatic wire stripper machine equipped with 11Channels and 10 blades for easy access to any cable or wire from the smallest to the largest. Comparing the cables/wires' diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time.Security Design The blades and rollers rotate together at the same time by means of the gear so that the cable does not slip. Top spring loaded mechanism allows tension adjustment of the cutters depending on wire or jacket size you are cutting, such design also prolongs blade life. The emergency stop button for unforeseen wire jams. All you have to do is slip the intact wire into the feeding hole and turn on the switch. Don't tuck your finger in, though, when it's on.Specifications：Brand‎GarveeColorBlueMaterialAluminum, Acrylic, Copper WireVoltage110V 60HZPower370WStripping Diameter1.5 -38 mm, 0.06-1.5 inchStripping Speed65 ft/min, 30 m/minBlade Thickness2.8 mm/0.11 inItem Dimension(L*W*H)17.3 x 12 x 14.1inProduct Dimensions25.98 x 13.78 x 16.93 inchesItem Weight92.6 Pounds/42kgIncluded Components1 x Electric Wire Stripping Machine