Description
--Small mechanical thermostats are designed to control electric heaters or cooling fans in electric cabinets, which cause accidents due to temperature factors. --Widely used in communications, wind power generation, fire fighting equipment, ships, petrochemicals, large factories, coastal factories, docks, water treatment facilities, equipment, etc. --The control range is 0°C to 60°C.--This product has the characteristics of easy installation, small size, and long service life.Features: It can automatically start the electric heater and fan, generate condensation, maintain a good working environment, and protect components. Can be fixed on DIN standard rail (DIN15, DIN32, DIN35). Models are available (KTO011/KTS011/ZR011)Description: Name: temperature controller 1. Product overview: 1. Wide temperature range setting 2. Small size2. Simple installation 4. High switching performance and high sensitivity KTO011: red, thermostat (normally closed), used to control the heater KTS011: blue, thermostat (normally open), used to control fan or switch signal device ZR011 : Thermostat (normally open and normally closed integrated design), dual-purpose for heating and cooling 3. Working principle: Due to the different coefficients of thermal expansion, when the temperature changes, the degrees of thermal expansion and contraction of the two sides of the bimetal sheet are different, so the degree of bending changes at different temperatures. When the temperature is higher than the expansion temperature of the bimetal, the contact position of the bimetal is deformed and disconnected, and the circuit is disconnected. When the temperature is lower than the expansion temperature of the bimetal, the contact position of the bimetal returns to its original shape and closes, and the circuit is closed. The thermostat is divided into normally open and normally closed Normally closed: After the temperature is set, the thermostat is in the normally closed state. When the actual ambient temperature drops to or close to the set temperature, the load heating will be started. Usually the thermostat is in the normally closed state. When the actual ambient temperature When the temperature is higher than the set temperature, the load is always in the shutdown state. Normally open: After the temperature is set, the thermostat is in the normally open state. When the actual ambient temperature is higher than the set temperature, it will start the load cooling. Usually the thermostat is in the normally open state. When the actual ambient temperature When the temperature is lower than the set temperature, the load is always in a shutdown state3. the main parameters: switch temperature control ±7K(±4K tolerance) Sensing element Temperature Sensitive Material contact type quick action contact Contact resistance <10mΩ Service life >100,000 cycles Switch Large Capacity 250VAC, 10(2)A ; 120VAC, 15(2)A ; DC 30W EMC Acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-,3 Wiring method 2.5mm² wire Installation method 35mm DIN rail Shell material Plastic UL94 standard V-0 fire rating, light gray Operating/storage temperature: -20 to +80°C (-49 to +176°F) Protection class: IP20Packing list: 1 x temperature controller Note: Different displays may cause the color of the item in the picture a little different from the real thing. Manual measuring,please allow 1~3mm error,thank you.